【How-to】How to clean weed bowl –

Can you clean weed bowls?

Soak a tissue with isopropyl alcohol and clean the bowl and the down-stem. Use warm water to rinse them off. As you rinse, gently shake the bong to wash away the residual resin.


College Students Holiday Gift Guide

Even starving college students need quality cannabis gear. This list provides a full range of must-haves for the most studious consumers on your holiday shopping list.

Can I clean silicone with alcohol?

Here are some options for cleaning: Rubbing Alcohol: This is one of the easiest and most common methods of sterilizing medical grade silicone. This will eliminate off any bacteria that may be present, as well as dust or particles.

How a Pipe Works

A pipe works very simply. It’s just a small device that contains a bowl at the end (called the carb) where you place a slight amount of cannabis on. You can then use the hole at the other end of the pipe to breathe the smoke in. However, before you can do this you need to heat the cannabis up. You do so by taking a lighter and holding it under the pipe’s love until it starts to heat up. You can then start to inhale and exhale the smoke.

Step 1: Let It Soak

To start, place your bowl inside of the plastic bag, and put it down on a flat surface. Fill the bag with the isopropyl alcohol until the entire bowl is submerged in the liquid. Add around a spoonful of your salt of choice to act as an abrasive, and then let the pipe sit for about two hours.

After a few hours, the resin in the pipe will have been weakened. This is where step 2 comes into play.

The Himalayan Women Who Make Cannabis Resin Charas

To celebrate Women in Weed week here at Seedsman, this blog will look at women’s ancient role in harvesting psychoactive cannabis resin (charas) [caras] in the Himalayas. Where Charas Comes From Making hashish…

How to Clean a Bong or Water Pipe: Step-by-Step

  1. EMPTY AND DISASSEMBLE: Pour out any leftover bong water. Remove the bowl/downstem from the bong’s body. To clean the bowl and downstem, follow the same steps listed for the pipe deep clean up above. 
  2. FILL THE BONG: Plug the base hole of the bong with cotton balls, and fill the chamber with isopropyl alcohol. Allow the alcohol to reach every nook, cranny, and stain, but be sure to not overfill. Then, toss in a handful of your finest coarse salt. 
  1. SHAKE, SHAKE, & SIT: Reinforce your cotton ball blockade and plug the mouthpiece with paper towels or your palm, and vigorously shake. Just as with cleaning a pipe, this step may require a few repetitions, so you may expect to set the bong aside for a half hour or two before returning with newfound determination.
  1. BRUSH THE BONG: After the majority of the gunk and resin has been dislodged, dispose of the sullied alcohol mixture. If you’ve still got hard to reach stains inside the base of your bong, you can use an appropriately-sized bottle brush to scrub the leftover filth.
  1. RINSE & DRY: Fill the chamber with hot, soapy water and repeat step three. Once thoroughly shaken, rinsed, and shining, wipe down the outside of the bong. Time to pack a bowl and let pot clouds roll!

DIY Tips to Keep Your Bong Cleaner:

There are a couple simple, home remedies that help maintain and clean your bong. The first being: LEMONS! Aside from zesting up dishes and adding a kick to Applebee’s tap water, lemons are great for slowing the buildup of resin. So squeeze a couple drops of lemon juice into your bong, and see for yourself. Plus, you’ll get an added note of citrus in every inhale!

Other than that, the final best practice to keep your bong cleaner is to simply store your bong empty. Leftover bong water can contribute to bacteria growth, and that’s not the sort of chronic you want to welcome into your lungs.

Jon’s Stone-Cold Cop List #19

A new year, a new(ish) name, but we’re maintaining that same pressure. The Cop List is back to sus through the smoke and let you know which hype is real. This month featuring the world’s first legal Cross Joint, a new way to grind your greens, and as always, the latest dank.

What can you help me when the results of How To Clean A Weed Bowl are not available at your site?

Normally, our site gives users dozens of results from every field in life. But it is so hard to give all of How To Clean A Weed Bowl related content, so we always encourage users to send their suggestions for us to improve our site day by day. Contact us now, we will add the meaningful issues about How To Clean A Weed Bowl in a moment.

Cleaning Materials: What Can I Use to Clean My Pipes and Water Pipes?

If you’re asking yourself, “What do I use to clean my bong) and bowl?” – here are a few household items you can gather to get your glass glistening:

  • Isopropyl Alcohol
  • Coarse Salt
  • Ziplock Bag(s)/Tupperware Storage
  • Scraping Tool
  • Cotton Balls
  • Q-tips
  • Pipe Cleaners
  • Long Bottle Brush if Cleaning Bong

Alcohol or Vinegar: – What is the Best Cleaner for Pipes and Bongs?

There’s a heated debate in the stoner community over the best cleaner for bongs and pipes. The majority of smokers – as well as the writer of this article – swear by isopropyl alcohol’s potent cleansing abilities. However, there’s a vocal minority that argues the best way to clean a bowl or bong is with the help of some white vinegar. 

This isn’t due to vinegar’s efficacy or ease. In fact, this method takes a bit more effort and elbow grease than its isopropyl alcohol (ISO) counterpart. But there have been concerns brought up surrounding ISO’s environmental exposure, with it possibly depleting oxygen for aquatic life and killing essential bacteria and algae when rinsed into the sewer system. Also, COVID-19 has made isopropyl alcohol a bit difficult to find on shelves nowadays! Still, if you prefer the punch isopropyl alcohol packs and are able to get a hold of it, there are easy, environmentally conscious ways to handle the product’s disposal.

How Do You Clean a Glass Pipe without Alcohol – with Vinegar?

Vinegar, along with coarse salt or baking powder, has shown to be an effective and safe way to clean a glass pipe or bong. However, it isn’t nearly as potent as methods using isopropyl alcohol, which leads to more time dedicated and more effort applied to the brushing and scrubbing steps of the process. Different directions on how to clean a bowl or bong without isopropyl alcohol that others have found success with include denture cleaning tablets, grain alcohol, epsom salts, and more. If you want to know how to clean a glass pipe or water pipe with vinegar or any of these other options, just replace ‘isopropyl alcohol’ with your cleaner of choice in the next section . . .

The End of Marijuana Prohibition

Marijuana law reform is no longer a joke; all people who care about this issue can sense that the momentum has shifted. Marijuana has never been as mainstream as it is today. Film, television, art, clothing – marijuana and its iconic leaf are everywhere. Some politicians are opening the issue up for debate. Make no mistake; our elected officials are normally the most cowardly, spineless creatures on earth. That they’re willing to use the “M” word at all is a sign that the taboo has faded. Even mainstream media outlets seem willing to dispel the old myths and make the truth plain: marijuana is far less dangerous than alcohol and cigarettes; marijuana prohibition is a miserable failure that has hurt our nation in untold ways.

So what do we do with this momentum? How can we turn this shift into a sea change and the end of prohibition? Write to your state representatives. When you’re finished, write to them again. Join groups like Norml (The National Organization for the Reform of Marijuana Laws). You can start a chapter in your area. Get active. All reliable studies indicate that Americans, by a strong majority, want to legalize marijuana outright. Can politicians and those who profit from incarceration stem this wave? Don’t let that happen.



To clean a wooden pipe you will need the following tools:

  • Q-Tips
  • Paper towels
  • Rubbing alcohol
  • Pipe Cleaners & Scrapers
  • Pipe Tool
  • Olive oil or cooking oil

Step # 1

Take the stem off. Dip a pipe cleaner in the rubbing alcohol and run it through the shank into the bowl. It should pick up all the gunk.

Step # 2

Step # 2

Get another pipe cleaner. Dip it in the rubbing alcohol and this time run it through the stem.

Step # 4

Step # 4

Use the pipe tool or a pipe knife to clean the inside of the bowl. If the inside of your pipe bowl developed a heavy buildup of resins, then you will need to scrape them off with the pipe knife. Once you have finished scraping, wipe the inside with a Q-tip or pipe cleaner soaked in alcohol.

Step # 5

Step # 5

Lastly, put a little bit of olive oil or cooking oil on your paper towel and rub it on the outside of the bowl of your wooden pipe. It will give the pipe a nice shine.

How to Clean a Pipe:

Keeping your weed pipe clean is important because it will hit much better if it is clean and not cloggy. Marijuana resin builds up over time with pipe smoking weed, so you have to do a little maintenance of your weed bowl. There are some great products out there that you can buy and clean your pipe in one easy go. This is one we think works great:

 The gunk in your pipe basically is the villain of

 The gunk in your pipe basically is the villain of the smoke show, preventing what would otherwise be a great session from reaching its full potential. Now that gunk has met its kryptonite with this Kryptonite Cleaner!

Every now and then a good stock photo is just what you need!


If you’re more of a DIY pipe cleaner person, you’ve got options, too! One of the best, easiest and most basic ways to clean your metal or ceramic weed pipe to maximize your experience is to:

1) Fill a plastic bag with 1 tsp of salt and some 91% isopropyl alcohol.

2) Submerge your pot pipe in the salt and alcohol and let it sit to soak, then shake the baggie, swishing the solution around.

3) Afterwards you can a washcloth, rags or paper towels to wipe the oily resin off, and a nail to scrape the sides of your weed bowl and the pipe stem. It’s important to remove all the resin, because it has mixed with alcohol and would be toxic to smoke.

4) You should then use a little dish soap to wash away all resin and the alcohol completely. Some cannabis consumers like to boil their marijuana pipes in water and then clean them with alcohol and rags. Other tokers use nail polish remover, but you have to be sure to remove all traces of potentially hazardous cleaning chemicals by soaking chemically-treated pot pipes in dish soap and rinsing thoroughly.



Our Story

The mission of Marijuana Beginners is to provide you the awareness and education about cannabis, the different strains, edibles, tinctures, CBD oil, bongs, vaporizers, bubblers, and other accessories. Marijuana has some potent health benefits, and you will want to learn about what you can so you can live in optimal physical and mental health. The site consists of various weed experts that provide you with high-quality, useful, informative, and engaging content. Marijuana Beginners is here to educate, and you will want to check the team below and read more about us here.


Leave a Reply

Your email address will not be published.